The HC-10 is used for cable and cable sheath testing, and for the pin-pointing of cable sheath faults and
cable faults due to earth contact. The operation of the system is achieved via touch screen and rotary encoder.Multiple signal reception methods used for different cable laying scenes.
Intelligent Diagnosis
Intelligent Diagnosis
Stethoscope mode
Stethoscope mode
Probe mode
Probe mode
Step voltage
Step voltage
AUTO ZERO
AUTO ZERO
Auto boosting
Auto boosting
Touch Screen
Touch Screen
Power Supply
Power Supply
Solve cable sheath faults in various scenes
The very powerful 10 kV DC source allows HV cables to be tested.A multi-section facility permits the entry of cable segments with different parameters. Difficult cable faults can be “burned” thanks to the available high current.
10
kV
DC Voltage
150
mA
Locate Current
1
mA
I Sensitivity
50
μV
U Sensitivity
Automatic test sequence，recommend test methods
Intelligent evaluation of power supply protective layer status and automatic recommendation of working mode
Stethoscope mode，suitable for cable trench or tunnel
Signals exist before fault point;Signals disappear behind fault point
Probe mode，suitable for cable pipe
Maximum signal value is near fault point
Step voltage mode,suitable for direct burial
Red or black arrow indicates the location of the fault
Burning function,suitable for high-resistive faults
Continuous high current output can quickly burn through high resistance faults to low resistance, converting the nature of the fault
Say goodbye to the hassle of power supply with built-in power supply
Built in high-capacity lithium battery, can work continuously for more than 10 hours
